MaxTrac KS330823HC GM SUV 2"/3" Lowering Kit

Lower Your GM SUV with 50% More Rear Ground Clearance

Give your 2021–2026 Chevrolet Tahoe, Suburban, GMC Yukon, or Yukon XL a lower, more aggressive stance with the MaxTrac KS330823HC 2"/3" Lowering Kit. This suspension package combines 2" front lowering spindles with adjustable 0"-3" rear lowering control arms, allowing the rear height to be dialed in while maintaining considerably more under-vehicle clearance than MaxTrac's deeper 0"-4" control arms.
The included high-clearance rear arms have only a 2" reduction in ground clearance at their lowest point, providing 50% more ground clearance than MaxTrac 200804 0"-4" arms. This kit is configured for non-MagneRide/non-Adaptive Ride models, while SUVs equipped with those electronic suspension systems require MaxTrac 1019AR sensor brackets.

Key Features

2" Front Lowering Spindles

Front drop spindles lower the SUV 2 inches while retaining the factory-style front suspension layout.

Adjustable 0"-3" Rear Drop

Rear lowering control arms provide an adjustable 0"-3" drop, allowing the rear stance to be matched to the desired ride height.

50% More Rear Ground Clearance

The high-clearance rear arms reduce clearance by approximately 2" at their lowest point, providing 50% more ground clearance than MaxTrac 200804 0"-4" lowering arms.

High-Clearance Rear Control Arms

The revised rear arm design is ideal for lowered street SUVs where additional clearance over driveways, transitions, and road obstacles is desirable.

18" Factory Wheel Capability

The spindles are designed with a slightly reduced turning radius to accommodate factory 18" wheels when all other wheel requirements are met.

Improved Turning Radius with 20"+ Wheels

Using 20" wheels or larger can allow increased steering clearance and a greater turning radius compared with the factory 18" wheel configuration.

What's Included

(2) Front 2" lowering spindles
(2) Adjustable 0"-3" high-clearance rear lowering control arms
Installation hardware as supplied by MaxTrac

Vehicle Fitment

Fits

2021–2026 Chevrolet Tahoe
2021–2026 Chevrolet Suburban
2021–2026 GMC Yukon
2021–2026 GMC Yukon XL
Standard / non-MagneRide / non-Adaptive Ride suspension

Additional Electronic Suspension Fitment

SUVs equipped with MagneRide or Adaptive Ride Control require MaxTrac part number 1019AR sensor brackets.

Does Not Fit

GMC Yukon AT4 models

Important Notes

Requires 18" wheels or larger with 6" backspacing or less.
17" wheels will not fit these spindles, including a 17" spare tire/wheel.
Fender trimming may be required depending on wheel, tire, and vehicle configuration.
The spindles have a slightly reduced turning radius when used with factory 18" wheels.
Turning radius can be increased when running 20" wheels or larger.
SUVs equipped with MagneRide or Adaptive Ride Control require MaxTrac 1019AR sensor brackets.
Does not fit AT4 models.
Rear control arms provide an adjustable 0"-3" rear drop.
The rear arms reduce ground clearance by approximately 2" at their lowest point, providing 50% more ground clearance than MaxTrac MaxTrac 200804 0"-4" arms.
MaxTrac does not recommend wheels wider than 9" or wheels with less than 4.5" backspacing. Using wheels outside these recommendations will void applicable manufacturer warranties.

Product Specifications

Brand: MaxTrac Suspension
Kit Part Number: KS330823HC
UPC: N/A
Tariff: N/A
Kit Type: Lower
Product Type: Front & Rear Lowering Kit
Position: Front & Rear
Front Drop: 2"
Rear Drop: Adjustable 0"-3"
Front Components: Lowering Spindles
Rear Components: High-Clearance Lowering Control Arms
Rear Ground Clearance Reduction: 2" at Lowest Point
Ground Clearance Improvement: 50% More Than 200804 Arms
Minimum Wheel Diameter: 18"
Maximum Application Backspacing: 6"
17" Wheels: Not Compatible
17" Spare Wheels: Not Compatible
MagneRide: Requires 1019AR
Adaptive Ride Control: Requires 1019AR
AT4: Not Compatible
Material: Steel
Color: Black
Finish: Black Powder Coat
Sold As: Kit
Weight: 107 lbs
Multiple Box Item: Yes
Country of Origin: N/A
Origin Criterion: N/A

Why Choose MaxTrac KS330823HC?

The MaxTrac KS330823HC is built for GM SUV owners who want a substantial lowered stance without giving up as much rear ground clearance. Its 2" front spindles and adjustable 0"-3" rear control arms provide flexibility when setting the final stance while maintaining 50% more rear ground clearance than the 200804 0"-4" arm design.
Wheel compatibility is also built into the spindle design. Factory 18" wheels can be retained with a slightly reduced turning radius, while moving to 20" or larger wheels can improve steering clearance. For MagneRide or Adaptive Ride applications, adding the 1019AR sensor brackets allows the suspension sensors to accommodate the lowered configuration.

Perfect For

Tahoe 2"/3" lowering builds
Suburban lowered street SUVs
Yukon and Yukon XL suspension upgrades
Adjustable 0"-3" rear drops
High-clearance lowering projects
Factory 18" wheel applications
20"+ custom wheel setups